Device Description - Weller WXD 2 Operating Instructions Manual

WXD 2

4 Device description

The Weller WXD 2 is a versatile desoldering station designed for
professional repairs to high-tech electronic sub-assemblies in
industrial production engineering and in the repair and laboratory
fields. The WXD 2 has 2 independent channels for the simultaneous
operation of 2 soldering tools. Precise temperature control at the
soldering tip is guaranteed by the digital control electronics together
with superior-quality sensor and heat transfer technology.
High-speed measurement data acquisition provides maximum
temperature precision and optimal dynamic temperature
performance in load situations.
The desired temperature can be set from 50 °C – 550 °C
(150 °F – 999 °F) depending on soldering tool model. Actual and
nominal values are displayed digitally. There are four buttons
(2 per tool) for saving fixed temperature presets.
The Weller WXD 2 desoldering station has the following functions
and features:
− Modern operating concept and navigation
− Controlled using sensor buttons
− Multilingual menu navigation
− LC graphic display with blue LED backlighting
− Suitable for all tools up to 200 W or simultaneous
use of 2 x 120 W soldering irons
− No calibration needed
− Two connections for soldering tools with integrated parameter
memory (e.g. for fixed temperature)
− Automatic tool detection and activation of soldering-iron-specific
control parameters
− Digital temperature control
− Antistatic device design in accordance with ESD safety
− Different equipotential-bonding possibilities on the device
(standard configuration: hard grounded)
− Settings for soldering-iron-specific parameters such as: standby
temperature; standby time; AUTO OFF time; offset; control
response; process window; robot output (floating switching output)
− Settings for station-specific parameters such as: language;
temperature version °C/°F; password; touchtones on/off; LCD
contrast; LCD background brightness; screen saver
− Two connections for peripheral devices (e.g. WFE, WHP)
− Digital and optically decoupled robot connection
− USB port for memory stick (for firmware updates, configuration
and monitoring)
− Vacuum unit
− A footswitch input can be added using an adapter (see
Accessories, page 20)
5-21