Restore Default Values Mode - Epson TM-T88VI Technical Reference Manual

Restore Default Values Mode

In Restore default values mode, following values saved on NV Memory will be set back to default settings.
When any error occurs, you can use to specify the reason.
Setting Contents
Customized value
Memory switch
R/E (Receipt Enhancement) settings
Communication condition of USB interface
Communication condition of Bluetooth interface
Communication condition of network interface
TM-Intelligent function settings
NV graphics
NV bit image
User-defined page
User NV Memory
Web contents
Bluetooth low energy technology settings
Follow the steps below.
1
After running a self-test, hold down the Feed button for at least one second to enter
the Mode selection.
The Mode selection guidance is printed, and the Paper LED flashes.
2
Briefly press the Feed button four times (less than one second), hold it down for at
least one second to enter the Restore Default Values.
The guidance is printed.
3
When only restoring the default settings:
Briefly press the Feed button once (less than one second), hold it down for at least
one second. (Hold down the Feed button until the message of restore completion is
printed.)
When restoring default settings and deleting user defined data:
Briefly press the Feed button twice (less than one second), and then hold it down for
Restore Default Values
Setting Items
and Delete Defined Data
✔
✔
✔
✔
✔
✔
✔
-
-
-
-
-
-
Chapter 3 Advanced Usage
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
75
3