Restore Default Values Mode - Epson Mobilink TM-P80II Technical Reference Manual

Restore Default Values Mode

In Restore default values mode, following values saved on NV Memory will be set back to initial settings. When
any error occurs, you can use to specify the reason.
Setting Item
Customized Value
Memory switch
USB Interface Settings
Network settings
NV graphics
NV bit image
User defined page
User NV memory
Follow the steps below.
1
After running a self test, hold down the Feed button for at least one second to enter
the Mode selection.
The Mode selection guidance is printed, and the power LED flashes.
2
Briefly press the Feed button four times (less than one second), and then hold it
down for at least one second to enter the Restore Default Values.
The guidance is printed.
3
Briefly press the Feed button once (less than one second), hold it down for at least
one second. (Hold down the Feed button until the message of restore completion is
printed.)
Restore default settings
✔
✔
✔
✔
-
-
-
-
Chapter 4 Advanced Usage
Restore default settings
and Delete definition data
✔
✔
✔
✔
✔
✔
✔
✔
75