Main interface selection
Auto (interface that receives data first) (default setting)
UIB
USB
UIB/Bluetooth
Ethernet/Wi-Fi
No main connection I/F
When using this printer with multiple interfaces, make sure the interface that is always
connected to be set as the main connection.
When using multiple interfaces, set the receive buffer capacity to 4 KB.
You cannot use wired LAN and wireless LAN at the same time.
The displayed items vary depending on the interface configuration.
For information about the function, see
Startup display
Enabled
Disabled (default setting)
Auto re-connect iOS
Enabled (default settings)
Disabled
Baud rate
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps (default setting)
57600 bps
115200 bps
USB class
Printer class (default setting)
Vendor-defined class
Chapter 3 Advanced Usage
"Printing Using Multiple Interfaces" on page 28.
3
67