Settings in Standard Mode
Communication standard
Network mode
SSID
Encryption type
Passphrase
IP Address
Printing communication protocol
LP, LPR:
TCP Socket Port:
LP, LPR
Max. simultaneous connections:
Number of connections for which printing is
available:
Time out:
Job cancel:
Banner printing:
Socket communication
Port type:
Port number:
Port communication direction:
Max. simultaneous connections:
Number of connections for which printing is
available:
Time out:
Notes on Using the Wi-Fi Model
Keep the printer away from the devices, such as kitchen microwaves, that may cause radio wave interference.
Use channels that are away from the frequency bands that may cause radio wave interference.
Place shields between the printer and the devices that may cause radio wave interference.
Select either 2.4 GHz or 5 GHz, whichever is free from radio wave interference.
In auto channel setting for the access point, do not select a channel in which the printer may cause radio
wave interference.
124
Parameter
Transfers printing data
Transfers printing data and printer status via bidirectional direct socket
communication.
Default setting
802.11b/g/n
Infrastructure mode
EPSON_Printer
WPA2-PSK
EpsonNet
Automatically acquired by DHCP
6
1 (Other users need to wait until printing is
completed.)
90 sec. (changeable)
Not available
Not available
TCP communication port for direct printing
9100
bidirectional
6
1 (Other users need to wait until printing is
completed.)
90 sec. (changeable)