Table of Contents
Advertisement
Standard Accessories
•
Graduated Cone Assortment (hardened, 4-piece)
•
Wheel Weight Pliers
•
Rim Width / Diameter Caliper
•
Quick-Release Hub-Nut
•
Spacer Cup With No-Mar Ring
•
Mounting Spring
•
Calibration Weight
•
Hex Head wrenches
•
Spacer Ring
•
Anchor Bolts
•
Motorcycle Scale Extension
•
Weight Removal Tool
•
Outer Gauge Calibration Kit
•
Inner Gauge Calibration Kit
Technical Data / Features / Specifications
•
Motor: . . . . . . . . . . . . . 208-230V, 50/60HZ 1Ph.
•
Working Temperature: . . . . . . . . . . -5C / 27F to 50C / 82F
•
Drive System: . . . . . . . . . . . . . Serpentine Poly-V belt
•
Cycle time: . . 6-12 seconds (avg.) Depending on Wheel
•
Modes: . . . . . 1 Dynamic / 2 Static / Multi-Variable Alloy
•
Top Positioning Weight Locator: . . . . . . . . . . Standard
•
Inside & Outside Measuring: . . . . . . . . . . . . .Standard
•
Millimeter / Inches Selection: . . . . . . . . . . . . . Standard
•
Ounce / Gram Selection: . . . . . . . . . . . . . Standard
•
Hidden Weight Function: . . . . . . . . . . . . . Standard
•
Match Mount Function: . . . . . . . . . . . . . Standard
•
Wheel Offset Distance Data Entry: . . . . . . . . Automatic
•
Wheel Diameter Data Entry: . . . . . . . . . . . . .Automatic
•
Wheel Width Data Entry: . . . . . . . . . . . . .Automatic
•
Self-Calibration Function: . . . . . . . . . . . . .Standard
•
Auto Start When Hood is Lowered: . . . . . . . . Standard
•
Wheel Spin Braking: Automatic / Pulse Electronic
•
Wheel Restraint Pedal: . . . . . . . . . . . . .Standard
•
Maximum Tire Diameter: . . . . . . . . . . . . . 50" / 1270 mm
•
Max Tire Weight: . . . . . . . . . . . . . 150 pounds (68 kg)
•
Max. Wheel Diameter: . . . . . . . . . . . . . 10" - 30" / 254 - 762 mm
•
Wheel Width Capacity: . . . . . . 1.5" - 20" / 38 mm - 508 mm
•
Balancing Increments: . . . . . . . . . . . . . 0.25 or 0.01 ounce
•
Balancing Speed: . . . . . . . . . . . . . 180 RPM
•
Accuracy: . . . . . . . . . . . . . +- .5 Gram / .025 Oz.
•
Resolution: . . . . . . . . (Round Off Mode) 5 Gram / .25 Oz.
•
Shipping Weight: . . . . . . . . . . . . . 498 pounds / 226 kg.
INSTALLATION OF THE DISPLAY
1. Locate the display assembly and carefully remove all
the bubble wrap and plastic from the assembly.
2. Remove the terminal cover from the base, next lift
terminal and place it in its location, installing all four
Allen screws.
3. There are 7 pin connectors, place each one of them in
their proper location.
4. Be aware that CN4, CN8, and CN3 located on the
bottom right (See image below), are color coded.
Plug in these 3 pin connectors to their matching color
terminals on the board.
9
Hide quick links:
Advertisement
Table of Contents
