Table of Contents
Advertisement
Main Menu Summary
Label Settings
U1 Sensor Type
U2 Signal Offset
U3*,**Output Signal Offset
U4 Signal Filter
U5 Set Point Dead Band (SP1)
U6 Set Point Dead Band (SP2)
U7 Power Save Set Point
U8 Display Stabilizer
L
Set Point Limit
F1 SP2 and U7 Disable
F2 Heat/Cool Switch
F3 Alarm Enable
F4 Unit Display Enable
F5 Temperature Unit
F6* Current Output Enable
U1, Sensor Type
This setting tells the DQ15D control what type of sensor it is using.
Value/
Board # Sensor Type
1/5414
2-wire RTD
2/5414
2-wire RTD
3/5447* 3-wire RTD
4/5447* 3-wire RTD
5/5418** Thermocouple
6/5418** Thermocouple
7/5418** Thermocouple
90
8/5418** Thermocouple
175 REV ITS-90
9/5447* Voltage
10/5447* Current
11/5447* Frequency
12/5447* Resistance
The 5447 sensor board will also accept 2 wire RTDs. The default sensor type setting is 1
(1000 ohm 2 wire RTD). When using the 5447 sensor board, an on-board DIP switch
must also be configured, see Dip Switch Settings.
*Optional 5416 sensor board permits 4-20 mA signal process value transmission.
M-34-01
Revision - Date: 01 - 04/23/08
Description
Used to select the type of sensor
Offset -9 to +9 applied to reading
Adjusts 4-20 mA output from -9 to +9
Filter on input signals
Value from 1 to 99, SP1
Value from 1 to 99, SP2
Value from 1 to 99, power save mode
Stability when used with U4
High Set Point limit
Modifies control to single Set Point
N/A
Enable the alarm Set Point
Enable temperature units
Select °F or °C
Enable mA current
Sensor Description
Platinum RTD, TCR 0.00385 ohm/ohm/°C
Platinum RTD, TCR 0.00392 ohm/ohm/°C
Platinum RTD, TCR 0.00385 ohm/ohm/°C
Platinum RTD, TCR 0.00392 ohm/ohm/°C
J-Type Iron-Constantan NIST Monograph 175 REV ITS-90
K-Type Chromel-Alumel NIST Monograph 175 REV ITS-90
T-Type Copper-Constantan NIST Monograph 175 REV ITS-
R-Type Platinum, 13% Rhodium-Platinum NIST Monograph
Potential signal (1.0 to 10.0 V)
Current signal (4.00 to 20.00 mA)
Pulse train frequency (0-200 Hz, counts/sec)
Pure resistance signal (0 to 1000 ohms)
Main Menu Summary
19
DQ15D Manual
Hide quick links:
Advertisement
Table of Contents
