Omron F160 Operation Manual page 153

Gray Search and Precise Search
142
The initial screen for Gray Search will be displayed.
0.Gray search
Model registration
Search coordinate
Search region
Judgement conditions
Detailed conditions
Coordinate mode
2. Select Model registration.
The Model Registration Screen will be displayed.
Model registration
New
EBox
Ellipse OR
Circle NOT
Circumference
Polygon
3. Select New.
4. Select the shape of the desired figure.
5. Select the desired drawing mode (OR/NOT).
Note Refer to page 28 for methods for drawing regions.
An arrow cursor will appear.
Up to three figures (0, 1, and 2) can be drawn.
Model registration
6. Draw the region to be registered as the model with the shape selected.
The figure will be registered.
Once three figures have been drawn,
Add will no longer be displayed.
Model registration
Add
Figure0
End
7. If additional figures are to be drawn, select Add.
8. Repeat steps 4 to 6 as necessary to create the desired shape.
9. After drawing is completed, select End.
The measurement region will be registered and the screen in (2.) will re-
turn. The search coordinates (display cursor) and the model region will be
displayed.
[0]
465,241
Section 3-11