Other Error Messages - Oki B721 User Manual

Other Error Messages

Other Error Messages
●
●
This section explains the causes and remedies for an error message and the function of the
<ATTENTION> indicator. An error message appears on the display screen of the operator panel.
To display an error code, press the <HELP> button on the operator panel.
Error Messages
Error
code
Warning □
Error Postscript
4
Warning □
%TRAY% Empty
Warning □
%TRAY% Lift Up Error
Warning □
%TRAY% Overfilled
Warning □
File System is Full
Warning □
File System is Write Protected
Warning □
Erased Data Full
Warning □
Accounting Log Buffer is near full
Warning □
Accounting Log Buffer Full(Delete old
logs)
Warning □
USB Hub Unsupported
Please detach it
Warning □
Unsupported USB Device Detected
Please detach it
Warning □
Collate Fail:Too Many Pages
Press ONLINE Button
Message
<ATTENTION>
indicator
Lights up Interpreter detects an error due to the
following reason. Receive data after this
is ignored until the job completion. When
the job is completely received, this is
automatically cleared.
- The job has a grammatical error.
- The page is too complicated.
Lights up The tray is empty. Treated as Warning until
printing to the empty tray is designated.
Lights up Lift Up Error has occurred to Tray. That tray
is treated "Paper Empty" as a result, and
printing from that tray becomes disabled.
Lights up Displays that there is too much paper in
Tray. This is a warning; thus, printing will
not stop.
Lights up Disk-full is occurring. Because this is a
temporary warning, it remains until the end
of the job and disappears.
Lights up An attempt to write in a read-only file was
done. Because this is a temporary warning,
it remains until the end of the job and
disappears.
Lights up Indicates that a secret file waiting to be
erased is full.
Lights up It indicates the Job Accounting log buffer is
near full.
Lights up The function isn't accepted because log
buffer is full. (Related to JobAccount).
This message is displayed, if the log buffer
is full and "Operation at Log Full" in Job
Accounting Server Software is set to "Delete
old logs".
The new jobs will be able to execute after
the following operations.
1. The log in the unit must be got by Job
Accounting Server Software.
2. The setting of "Operation at Log Full"
must be changed to "Does not acquire
logs".
Lights up Indicates that the USB hub is connected,
which is not supported by the printer.
This status will be displayed until
unconnection of that USB hub.
Lights up Indicates that the USB device is connected,
which is not supported by the printer.
This status will be displayed until
unconnection of that USB device.
Lights up Memory overflow was occurred in the collate
copy. Stays displayed until the ONLINE
button is pressed.
- 104 -
Cause/Remedy