Setting the Auto Power Off Time
Setting the Auto Power Off Time
●
●
Note
● In the factory default, a printer does not enter the auto power off mode while connecting to the network.
2
Settings for Auto Power Off
To enable the auto power off mode while
connecting to the network, perform the following
procedure:
1
Press the scroll button
panel.
2
Press the scroll button
to select [Admin Setup] then press the
<ENTER> button.
3
Enter the administrator password, using
the ten-key pad.
The factory default password is "aaaaaa." Press
the <ENTER> button whenever inputting one
character.
4
Press the <ENTER> button.
on the operator
several times
- 48 -
5
Press the scroll button
to select [Power Setup] then press the
<ENTER> button.
6
Press the scroll button
to select [Auto Power Off] then press
the <ENTER> button.
7
Press the scroll button
times to select [Enable] then press the
<ENTER> button.
8
Press the <ON LINE> button.
several times
several times
or
several