Setting The Clock - Ambirad SmartCom 3 Owner's Manual

3.4 Setting the Clock

Press the SETTING button till
SET CLOCK? appears in the display.
Press the OK button to change this user
mode.
Value to alter/confirm will start flashing.
SET Day
+ or - then OK
SET Hrs Mo
+ or - then OK
SET Mns Mo 09 :
+ or - then OK
SET Mon
+ or - then OK
SET Dat
+ or - then OK
SET Yr
+ or - then OK
Menu End
OK =yes SET =redo
press
Th 09 : 29
AUTO ON
Use the + button to increase the value.
Use the - button to decrease the value.
SET CLOCK?
OK =yes SET =next
press
or
Mo 09 : 29
09 : 29
29
06 - 18 - 09
06 - 18 - 09
06 - 18 - 09
or
SET Day Mo
+ or - then OK
repeat above procedure
Press the OK button to accept the value
and advance to the next display.
Press the UNDO button to cancel setting
but save any previous changes.
9
SET PROGRAM?
OK =yes SET =next
follow 'Setting the PROGRAM' menu
Clock will automatically
compensate for
daylight saving dates.
09 : 29
US