Setting The Program (On/Off Times) - Ambirad SmartCom 3 Owner's Manual

3.5 Setting the Programs
Press the SETTING button till
SET PROGRAM? appears in the
display.
Press the OK button to change this user
mode.
Value to alter/confirm will start flashing.
If the - button
pressed at an
time slot "--:--", the screen
advances to a further ON
time. The new ON time will
start flashing.
Mo ON
+ or - then OK
Mo OFF 2
+ or - then OK
Mo ON
+ or - then OK
press
Mo ON 3 20 : 30
+ or - then OK
Mo OFF 3 22 : 00
+ or - then OK
Copy to Tu
OK =yes SET =next
follow copy function menu
Use the + button to increase the value
in 10 minute steps.
Use the - button to decrease the value.
the value
SET Day
+ or - then OK
Mo ON
+ or - then OK
Mo OFF 1
+ or - then OK
is
unused
Mo ON
+ or - then OK
press
2 17 : 30
20 : 00
3 - - : - -
or
Copy to Tu
OK =yes SET =next
follow copy function menu
in 10 minute steps.
SET PROGRAM?
OK =yes SET =next
press
Mo
1 08 : 00
16 : 30
2 - - : - -
or
Copy to Tu
OK =yes SET =next
follow copy function menu
Press the OK button to accept the value
and advance to the next display.
Press the UNDO button to cancel setting
but save any previous changes.
10
or
SET MODE?
OK =yes SET =next
follow 'Setting the MODE' menu
3 timeslots per day
(each timeslot includes
an on and off time) are
allowed.
Pressing the
button at an unused
time slot "--:--", will display
the automatic copy function.
(see next page).
Press OK to copy day
settings.
Press SET to alter times for
that day.
OK