Ambirad SmartCom 3 Owner's Manual page 22

FROM BOTTOM OF LAST PAGE
R e s e t t i n g
individual logs
is achieved by
pressing the OK
button whilst the log
is displayed, then
OK to accept zero
value.
MOVE TO TOP OF NEXT PAGE
N I GHT SETBACK
ON
Turn 'OFF' to deactivate Night Setback
(outside of day temperature setting).
FROST PROTECT
ON
Turn 'OFF' to deactivate Frost Protection
(system off temperature setting 41°F).
LOCKOUT RESET
ARM A I R
Toggle between 'WARM AIR' and 'RADIANT'
for burner lockout sequence.
LOCKOUT LOG
0
Displays the number of lockouts since last
service reset.
LOCKOUT L I M I T
0
Determines the number of lockouts allowed
before 'LOCKOUT SERVICE' is displayed.
BURNER LOG
0 Hrs
Displays the number of burner hours since last
service reset.
BURNER L I M I T
1200 Hrs
Determines the number of burner hours allowed
before 'SERVICE HOURS' is displayed.
BURNER SAVE LOG
0 Hrs
Displays hours saved during ON periods but
heating is not called for.
BURNER OFF LOG
0 Hrs
Displays hours saved during OFF periods but
heating is required.
22
H -BONE LO/H I
OFF
Turn 'ON' for Hi/Lo Herringbone
SET/OK
SET/OK
SET/OK
SET/OK
SET/OK
SET/OK
SET/OK
SET/OK
SET/OK
SET/OK
configuration.
Setting limit to 00
Disables the
function.
22