Canon iB4100 series Online Manual page 636

Make sure printer is properly connected to computer.
Check3
If you are using a USB cable, make sure it is securely connected to both the printer and the computer. When
the USB cable is securely plugged in, check the following:
• If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the
computer, and retry the printing. If printing starts normally, there is a problem with the relay device.
Contact the vendor of the relay device.
• There could also be a problem with the USB cable. Replace the USB cable and retry the printing.
If you use the printer over a LAN, make sure the printer is connected to the network with a LAN cable or is
correctly set up for network use.
Make sure printer driver are installed correctly.
Check4
Uninstall the printer driver following the procedure described in
reinstall them from the Setup CD-ROM or the Canon website.
When printer is connected to your computer with a USB cable, check device
Check5
status from your computer.
Follow the procedure below to check the device status.
1. Open the Device Manager on your computer as shown below.
If the User Account Control screen appears, follow the on-screen instructions.
• In Windows 10, right-click Start button and select Device Manager.
• In Windows 8.1 or Windows 8, select Control Panel from Settings charm on Desktop > Hardware
and Sound > Device Manager.
• In Windows 7 or Windows Vista, click Control Panel, Hardware and Sound, and Device Manager.
2. Double-click Universal Serial Bus controllers and USB Printing Support.
If the USB Printing Support Properties screen does not appear, make sure the printer is correctly
connected to the computer.
Make sure printer is properly connected to computer.
Check3
3. Click General tab and check for a device problem.
If a device error is shown, see Windows Help to resolve it.
Other Error Messages (Windows)
If an error message appears outside printer status monitor, check the
Check
following:
• "Could not spool successfully due to insufficient disk space"
Delete any unnecessary files to increase the amount of free space on the disk.
• "Could not spool successfully due to insufficient memory"
Close other applications to increase the available memory.
Deleting the Unnecessary Printer Driver
636
and