Related Manuals for Canon MAXIFY iB4020
Summary of Contents for Canon MAXIFY iB4020
- Page 1 Installing Your Printer to Your Network for the First Time MAXIFY iB4020 Windows OS Wireless Setup Using a USB Cable...
- Page 2 Installing Your Printer to Your Network for the First Time MAXIFY iB4020 Windows OS Preparing to Connect My Printer to My Network Network Requirements Notes on Wireless Connection Setting up the Network Connection...
- Page 3 Preparing to Connect the Printer To the Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network.
- Page 4 Preparing to Connect the Printer To the Network Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer. •...
-
Page 5: Setting Up The Network Connection
Setup CD-ROM during restarting. The installation resumes once your computer has restarted. • If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access the network. If such a warning message appears, set the security software to always allow access. - Page 6 Setting up the Network Connection To begin setup of your MAXIFY iB4020 on your wireless network, insert the Setup CD-ROM* in your computer. The setup program will start automatically. The setup instructions presented in this document describe the “ Standard Setup ” . This setup method is used if your computer’s operating system is Windows XP or the printer is not detected using other methods.
- Page 7 Setting Up the Network Connection Click Next on the initial screen.
- Page 8 Setting Up the Network Connection On the following screen, select Wireless LAN Connection, then click Next.
- Page 9 Setting Up the Network Connection On the following screen, select Access Point Connection, then click Next.
- Page 10 Setting Up the Network Connection Continue following on-screen instructions. On the Printers on Network List screen, check the Setting printer could not be found on the list checkbox and click Next. 10 10...
- Page 11 Setting Up the Network Connection Follow the instructions on the Printer Setup screens (1-1 and 1-2) to select Wireless LAN setup on the printer. 11 11...
- Page 12 Setting Up the Network Connection Continue to follow on-screen instructions. Select Other Methods on the Setup Procedure Selection screen (2-1). *Note: If your printer’s display looks like the screen shown above Push Button Method in the Setup Procedure Selection screen (2-1), push the Stop button on the printer before proceeding to the next instruction 12 12...
- Page 13 Setting Up the Network Connection Continue to follow on-screen instructions. Select Other setup on the Setup Procedure Selection screen (2-2). 13 13...
- Page 14 Setting Up the Network Connection Continue to follow on-screen instructions. Select Wireless Setup Using the USB Cable on the Setup Procedure Selection screen (2-3). 14 14...
-
Page 15: Installing The Drivers & Software
Installing the Drivers & Software Continue following on-screen instructions. On the Software Installation List, select *software to install and click Next. *IJ Printer Driver is required and cannot be deselected. We recommend installing Quick Toolbox to take full advantage of the printer’s features. - Page 16 Continue following on-screen instructions. On the Check Printer Settings screen, place a check in the Set up the network connection via USB box and click Next. On the Connect Cable screen, connect the MAXIFY iB4020 to the computer with a USB cable.
- Page 17 Installing the Drivers & Software << Previous Next >> If the Detected Access Points List* appears, select the one you wish to connect to, enter the network key and click connect. *This screen normally appears if you have multiple access points or multiple access points exist in your immediate area. For details on how to check the Access Point name/network name (SSID) and network key, refer to the manual supplied with your access point or contact its manufacturer.
- Page 18 Installing the Drivers & Software << Previous Next >> If the Confirm Connection Access Point* screen appears, verify the information then click Yes *This screen normally appears when you have only one access point...
- Page 19 Installing the Drivers & Software Continue following on-screen instructions. When the Setup Completion dialog box appears, click Complete. At this point, setup of the printer and network is complete. Continue to follow any remaining on-screen instructions to finish and exit the setup program.