Canon iB4100 series Online Manual page 157

Important
• The ink tank will not fit in the wrong position. Check the label under the installation position, and
install the ink tank in the correct position.
5. Push the ink tank in firmly until it clicks into place.
6. Press the OK button to select [OK]Exit.
If [OK]Next is displayed, another ink tank can be replaced.
To replace the next ink tank, press the OK button and repeat this procedure from step 2.
To exit ink tank replacement, press the OK button until [OK]Exit is displayed.
The print head holder moves to the standby position. The ink tanks cannot be removed from this
position.
Important
• Printing is not possible without a complete set of ink tanks installed. Install all ink tanks.
157