Check 5: Cannot Find Printer On Check Printer Settings Screen During Wireless Lan Setup - Canon iB4100 series Online Manual

Hide thumbs Also See for iB4100 series:
Table of Contents

Advertisement

Check 5: Cannot Find Printer on Check Printer Settings Screen
During Wireless LAN Setup
Disable block in firewall function temporarily.
The firewall of your security software or operation system for computer may limit communication between
the printer and your computer. Check the firewall setting of your security software or operation system or
the message shown on your computer and disable block temporarily.
If firewall interferes with setup:
• If message appears:
If a message appears warning that Canon software is attempting to access the network, set the
security software to allow access.
After allowing the software to access, click Redetect on the Check Printer Settings screen to
redetect the printer.
If the printer is found, follow the instructions on the screen to continue to set up the network
communication.
• If no message appears:
Cancel the setup, and then set the security software to allow Canon software below to access the
network.
◦ For Windows:
Setup.exe or Setup64.exe in the win > Driver > DrvSetup folder on the Setup CD-ROM
◦ For Mac OS:
Setup.app, Canon IJ Network Tool.app, canonijnetwork.bundle, CIJScannerRegister.app,
Canon IJ Scan Utility2.app, and CIJSUAgent.app
After setting the security software, redo the network communication setup from the beginning.
After setup is completed, enable firewall.
Note
• For more on firewall settings of your operating system or security software, see instruction manual or
contact its manufacturer.
If firewall settings are not causing problem:
Go to check 6.
Check 6: Cannot Find Printer on Check Printer Settings Screen During Wireless LAN Setup
546

Advertisement

Table of Contents
loading

Table of Contents