Quick Button Descriptions; Enter Button; User Button - OSEE RMS5032 User Manual

4.3 Quick Button Descriptions

4.3.1 ENTER BUTTON

When MENU is not used, you can press ENTER to regulate the following parameters: VOLUME,
BRIGHTNESS, CONTRAST, SATURATION, SHARPNESS, and HUE.
Press ENTER six times, parameters will cycle. You can get the exact value combined with buttons
of ∧（up）or ∨(down).
 VOLUME: Used to regulate the volume. Range: -30~0dB, the maximum: 0dB.
 BRIGHTNESS: Used to regulate the brightness, range: -116~139, the typical: 0.
 CONTRAST: Used to regulate the contrast of image, range: -128~127, the typical: 0.
 SATURATION: Used to regulate the saturation of image, range: -128~127, the typical: 0.
 SHARPNESS: Used to regulate the sharpness of image, range: 0~15, the typical: 0.
 HUE: Used to regulate the hue of image, range: -32~31, the typical: 0.
Note: To regulate the option DEFAULT, use the reset item in video 1/2 of the main MENU. You can reset
the following parameters of BRIGHTNESS, CONTRAST, SATURATION, SHARPNESS, and HUE.

4.3.2 USER BUTTON

Press the USER button on the front panel; it will display the following table. The table will
disappear after 3 seconds without operation.
USER can be used as quick-button, and include many options. When you choose one option, for
example, if you have already set USER1 at H/V DELAY, you can press "USER1" directly to realize
each function of H/V DELAY, and need not set in the main MENU. Of course you can set "USER1"
at other option accordingly.
The function of USER can be set in the main MENU. Set steps: press MENU, combined with
buttons of ∧（up）or ∨(down), you can find "USER CONFIG" in the sub-MENU, also combined
with buttons of ∧（up）or ∨(down), and you will find USER1~ USER3.
—8—
RMS5032 LCD MONITOR
USER FUNCTION
USER 1 H/V DELAY
OFF
User Manual