Changing A Wheel - PEUGEOT 4008 Online Manual

Changing a wheel

Procedure for replacing a faulty wheel with the spare wheel using the tools supplied with the vehicle.
Access to the tools
the tools are stowed in the boot under the
floor.
to gain access to them:
F Open the boot.
F Lift and remove the boot floor.
List of tools
these tools are specific to your vehicle. Do not
use them for anything else.
1. Wheelbrace.
used to remove the wheel trim and the
wheel fixing bolts.
2. Jack.
used to raise the vehicle.
3. Handle.
used to operate the jack.
4. Removable towing eye.
For more information on Towing the
vehicle, refer to the corresponding section.
5. Socket for security wheel bolts (available
as an accessory).
used to adapt the wheelbrace to the
special "security" wheel bolts.
In the event of a breakdown
Wheel with trim
When removing the wheel, remove the
trim first using the handle 3, pulling at
the cut-out.
When refitting the wheel, refit the trim
starting by placing its cut-out opposite
the valve and press on its outer edge
with the palm of your hand.
8
193