PEUGEOT 4008 Online Manual page 193

F Shake the sealant cartridge, remove the
cap and screw on the injection end-piece.
Avoid removing any foreign bodies
which have penetrated into the tyre.
take care, this product is harmful if swallowed and causes irritation to the eyes.
Keep it out of reach of children.
the use-by date of the sealant is marked on the cartridge.
After use, do not discard the empty cartridge but take it to a PeugeOt dealer or an
authorised waste disposal site.
Do not forget to obtain a replacement cartridge; they are available from a PeugeOt dealer
or a qualified workshop.
F Connect the injection end-piece to the
valve of the tyre to be repaired.
F Press several times on the sealant
cartridge (top down) with your hand, to
inject all of the product into the tyre.
F Remove the injection end-piece.
F Refit the valve core and tighten it using the
tool provided.
In the event of a breakdown
F Check that the compressor switch A is at
the "OFF" position.
F uncoil the compressor pipe B fully.
F Connect this pipe to the valve of the
repaired wheel.
F Connect the compressor's electric plug to
the vehicle's 12 V socket (ignition switch in
position "ACC" or ACC mode).
F Start the compressor by turning the
switch A to the "ON" position to inflate the
tyre to the pressure indicated on the tyre
pressure label.
For more information about Identification
markings, refer to the corresponding
section.
8
191