Table of Contents
Advertisement
04
RADIO
DAB (Digital Audio Broadcasting)
Digital radio
Selecting the waveband
Press the RADIO button repeatedly to
select the waveband; this changes in
the following order: FM1 / FM2 / FM3 /
DAB1 / DAB2 / DAB3 / MW / LW.
Automatic station search
Press button "7" or "8" respectively
to search for lower or higher
frequencies.
the search begins automatically and
stops on the first station found.
Manual station search
turn the SEL thumbwheel respectively
to the left to search for lower
frequencies or to the right to search for
higher frequencies.
Digital radio provides a superior audio quality and also additional
categories of traffic announcements.
the different channels offer a choice of radio stations in alphabetical order.
Storing stations
You can store up to six stations for each waveband.
each new stored station replaces the previous station.
Press one of the six buttons "1" to "6" until an
audible signal is heard.
the sound cuts out, then becomes audible again
after storing.
the number of the button and the frequency of the
associated radio station appear on the display.
to retrieve the pre-set memory setting, press the button and release
it within two seconds.
"DAB" does not have 100% coverage of the country.
When the digital signal is weak, "DAB" allows you to continue
listening to the same station, by automatically switching to the
corresponding analogue "FM" station (if it exists).
325
Advertisement
Chapters
Table of Contents
