Changing A Wheel - PEUGEOT 3008 HYbrif4 Handbook

CHANGING A WHEEL

Procedure for changing a faulty wheel
for the spare wheel using the tools pro-
vided with the vehicle.
Before doing any work on your
vehicle, switch off the ignition
( Ready lamp off) to avoid any
risk of injury resulting from automatic
operation of the engine.
When using lifting equipment
(a jack for example), take care
to use the jacking points pro-
vided, so as to avoid damaging
the cables.
Access to the tools
The tools are stowed in the boot.
172
List of tools
All of these tools are specifi c to your
vehicle. Do not use them for other
purposes.
1. Wheelbrace * .
For removing the wheel trim and
removing the wheel fi xing bolts.
2. Jack with integral handle * .
For raising the vehicle.
3. "Bolt cover" tool (according to
equipment) * .
For removing the bolt protectors
(covers) on alloy wheels.
4. Centring guide * .
For refi tting an alloy wheel to the hub.
5. Socket for the security bolts (lo-
cated in the glove box) * .
For adapting the wheelbrace to
the special "security" bolts.
6. Two chocks to immobilise the ve-
hicle.
Other accessories
7. Removable towing eye.
Refer to the
"Towing the vehicle".
8. Electric parking brake emergency
release control.
Refer to "Electric
brake" in the "Driving" section.
* According to country.
paragraph
parking