Table of Contents
Advertisement
In the event of a breakdown
Starting using another
battery
Check the electrolyte level and top up if
necessary.
For more information on Checking levels,
refer to the corresponding section.
F Raise the protective cover on
the (+) terminal.
Some functions are not available if the
battery is not sufficiently charged.
212
F Connect the red cable to the (+) terminal of
the flat battery A, then to the (+) terminal of
the slave battery B.
F Connect one end of the green or black
cable to the (-) terminal of the slave
battery B.
F Connect the other end of the green or black
cable to the earth point C on your vehicle
(engine mounting).
F Operate the starter, let the engine run.
F Wait until the engine returns to idle and
disconnect the cables.
Advertisement
Chapters
Table of Contents
