PEUGEOT 4008 Online Manual page 198

In the event of a breakdown
F Place the foot of the jack 2 on the ground
and ensue that it is directly below the
front A or rear B jacking point provided
on the underbody, whichever is closest to
the wheel to be changed.
F extend the jack 2 until it comes into contact
with the jacking point A or B used; the
contact area A or B on the vehicle must be
correctly inserted into the central part of
the head of the jack.
196
F Raise the vehicle until there is sufficient
space between the wheel and the ground
to admit the spare (not punctured) wheel
easily.
F Remove the bolts and store them in a clean
place.
F Remove the wheel.
ensure that the jack is stable.
If the ground is slippery or loose, the
jack may slip or drop - Risk of injury!
ensure that the jack is positioned only
at the jacking point A or B under the
vehicle, ensuring that the contact area
on the vehicle is correctly centred on
the head of the jack. Otherwise there
is a risk of damage to the vehicle and/
or of the jack dropping or slipping - Risk
of injury!