Access
Locking the vehicle
with perimeter monitoring
only
Deactivate the interior volumetric and tilt
monitoring to avoid unwanted triggering of the
alarm in certain cases, such as:
-
an animal left in the vehicle,
-
a window left partly open,
-
washing your vehicle.
66
Deactivation of the interior
volumetric and tilt monitoring
F Switch off the ignition and remove the
key from the ignition switch (OFF mode if
your vehicle has the "Keyless entry and
Starting" system).
F Raise and hold the wiper control stalk in
the "MIST" position for about 3 seconds.
F the audible signal sounds once and the
interior volumetric and tilt monitoring are
deactivated.
Raise and hold the wiper control stalk in the
"MIST" position for about 3 seconds to activate
them again, the audible signal sounds twice.