Repair Procedure - PEUGEOT 4008 Online Manual

In the event of a breakdown
2. Sealant cartridge for the temporary repair
of a tyre.
3. Replacement valve core.
4. Valve core removal/fitting tool.
5. Injection end-piece.
6. Speed restriction sticker.
After repairing the tyre, the speed
restriction sticker should be affixed
to the centre of the vehicle's steering
wheel to remind you that this wheel
must only be used temporarily.
Do not exceed a speed of 50 mph
(80 km/h) when driving with a tyre
repaired using this type of kit.
190

Repair procedure

F Stop the vehicle in as safe a location as
possible and on a level and stable surface.
ensure that the tyre valve is not at the
bottom of the wheel, in contact with the
ground.
F Apply the parking brake.
F Place the gear lever in position R for
vehicles with a manual gearbox, or in
position P for vehicles with a CVt gearbox.
F Switch off the ignition.
F Remove the valve cap for the tyre to be
repaired and keep it in a clean place.
F Insert the tyre valve core removal tool into
the valve and press on the tool to exhaust
all of the air from the tyre.
F turn the valve core tool around, insert it
in the valve and unscrew and remove the
valve core.
Keep the valve core in a clean place.
At temperatures below 0°C, the
sealant product may thicken. Warm
the cartridge inside the vehicle before
using it.