Table of Contents
Advertisement
body.
5.
Insert the DVP-7020 card into an unused PCI slot.
Hold the card only by its edges and carefully align it
with the slot. Insert the card firmly into place. Use of
excessive force must be avoided; otherwise the card
might be damaged.
6.
Fasten the bracket of the PCI card on the back panel
rail of the computer with screws.
7.
Connect appropriate accessories (Video cable to
camera. if necessary) to the PCI card.
8.
Replace the cover of your computer chassis.
9.
Plug in the power cord and turn on the computer...
10.
Remove the original BT878 driver before the card
installed if it is present.
Note:
Keep the anti-static bag for future use. You might need the
original bag to store the card if you have to remove the card
from the PC or transport it elsewhere.
1.9 Software / Driver Installation
Before you begin
To facilitate the installation of the enhanced display device
drivers and utility software, you should read the instructions
in this chapter carefully before you attempt installation. The
device drivers for the DVP-7020 board are located on the
6
DVP-7020 User's Manual
Advertisement
Table of Contents
