GEA Grasso M-Series Operating Manual page 68

Use, operation, control
Modes
10 Remote
+ Bus (loc.
SW)
11 Remote
+ Bus (net.
SW)
68
Start/stop from a central master controller via a bus
signal. The GSC TP controls the output depending on
a local setpoint (TP) and from this setpoint also auto-
matically switches the product ON/OFF.
Start/stop from a central master controller via a bus
signal. The GSC TP controls the output depending on
an external setpoint sent externally via the network
and from this setpoint also automatically switches the
product ON/OFF.
GEA Refrigeration Germany GmbH | P_261511_1 | Generated 01.04.2015
Operating Manual | GEA Grasso M-Series
Screw Compressor Packages
Signal for ...
Network Local
+ setpoint Setpoint
deviation
Network Network
+ setpoint Setpoint
deviation