Troubleshooting; Warranty - Honeywell RDWL515P2000 Installation And Operation Manual

Plug-in wireless doorbell
Hide thumbs Also See for RDWL515P2000:
Table of Contents

Advertisement

Available languages

Available languages

Troubleshooting

If
The doorbell does not work
Two 'beep' sounds are heard
after the normal tune
Range is reduced
For help please visit yourhome.honeywell.com or call 1-800-468-1502.

Warranty

1-year limited warranty
Honeywell warrants this product, excluding battery, to be free from defects in workmanship or materials, under
normal use and service, for a period of one (1) year from the date of first purchase by the original purchaser. If at
any time during the warranty period the product is determined to be defective due to workmanship or materials,
Honeywell shall repair or replace it (at Honeywell's option).
If the product is defective,
(i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it; or
(ii) call Honeywell Customer Care at 1-800-468-1502. Customer Care will make the determination whether the
product should be returned to the following address:
Honeywell Return Goods, Dock 4 MN10-3860, 1885 Douglas Dr. N., Golden Valley, MN 55422, or whether a
replacement product can be sent to you.
This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by
Honeywell that the defect was caused by damage which occurred while the product was in the possession of a
consumer.
Honeywell's sole responsibility shall be to repair or replace the product within the terms stated above.
HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY
WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION
OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE ONEYEAR DURATION OF THIS WARRANTY. Some states
do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
If you have any questions concerning this warranty, please write Honeywell Customer Care, 1985 Douglas Dr,
Golden Valley, MN 55422 or call 1-800-468-1502.
1. Press the Mute button until all of the Mute lights are off.
2. Make sure the correct batteries (1 CR2032) are installed with the correct
polarity.
3. The doorbell might be out of range; try the doorbell in a different location.
4. Reconnect the doorbell. See "Connect a Push Button".
Replace push button battery with a new CR2032.
1. Metal structures including uPVC door frames can reduce the range. Don't
mount the the doorbell or push button on or near metal structures.
2. Move the doorbell closer to the push button.
3. Weak batteries will reduce range. In cold conditions (below 41ºF [5ºC]),
batteries may need to be replaced more often.
Then
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents