Download  Print this page

Honeywell RPWL4045A2000 Installation Instructions Manual

Wireless doorbell adapter
Hide thumbs

Advertisement

Quick Links

Installation Instructions
Wireless Doorbell Adapter
FPO
Preparation
In the box you will find
Adapter
Safety
Turn Power OFF
To protect yourself and your equipment, turn off the power at the breaker
box or switch that controls your heating/cooling system.
Before proceeding with the installation, please note the following
safety warnings:
power tools and wear suitable protective equipment (e.g. safety goggles)
when drilling holes, etc.
• Before drilling holes in walls, check for hidden electricity cables and
water pipes. The use of a cable/pipe locator is advisable if in doubt.
For help please visit yourhome.honeywell.com or call 1-800-468-1502.
33-00195EFS_A.HALF-SHEET.indd 1
Home
Wall
Anchors
CR2032
Battery
Round Head
Screws
Wall Plate
Always follow the manufacturer's advice when using
RPWL4045A2000
To install you will need
Phillips Screwdriver
Standard Screwdriver
Drill and 1/4 in. (6 mm) drill bit
1
4/20/2016 4:40:41 PM

Advertisement

Table of Contents
loading

  Related Manuals for Honeywell RPWL4045A2000

  Summary of Contents for Honeywell RPWL4045A2000

  • Page 1 • Before drilling holes in walls, check for hidden electricity cables and water pipes. The use of a cable/pipe locator is advisable if in doubt. For help please visit yourhome.honeywell.com or call 1-800-468-1502. 33-00195EFS_A.HALF-SHEET.indd 1 4/20/2016 4:40:41 PM...
  • Page 2 Choose a Location Choose a location that is not near a heat source or on somthing that moves (like a door). Install Adapter 1. Separate the adapter from the wall plate. 2. Open the battery cover in the wireless adapter and install the CR2032 battery.
  • Page 3 Pairing the Adapter and the Doorbell 1. Press and hold the Setting button on the doorbell for three seconds. 2. Press the button on the back of the adapter. 3. Within 12 seconds of pressing the button on the adapter, press the Music button to select the ring for the doorbell.
  • Page 4: Fcc Regulations

    This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the defect was caused by damage which occurred while the product was in the possession of a consumer.
  • Page 5 • Before drilling holes in walls, check for hidden electricity cables and water pipes. The use of a cable/pipe locator is advisable if in doubt. For help please visit yourhome.honeywell.com or call 1-800-468-1502. 33-00195EFS_A.HALF-SHEET.indd 5 4/20/2016 4:40:43 PM...
  • Page 6 Choose a Location Choose a location that is not near a heat source or on somthing that moves (like a door). Install Adapter 1. Separate the adapter from the wall plate. 2. Open the battery cover in the wireless adapter and install the CR2032 battery.
  • Page 7 Pairing the Adapter and the Doorbell 1. Press and hold the Setting button on the doorbell for three seconds. 2. Press the button on the back of the adapter. 3. Within 12 seconds of pressing the button on the adapter, press the Music button to select the ring for the doorbell.
  • Page 8 Si le produit est défectueux, (i) renvoyez-le avec la facture ou une autre preuve d’achat date au lieu d’achat; ou (ii) appelez le service à la clientèle de Honeywell en composant le 1-800-468-1502. Le service à la clientèle déterminera si le produit doit être retourné à...
  • Page 9 • Before drilling holes in walls, check for hidden electricity cables and water pipes. The use of a cable/pipe locator is advisable if in doubt. For help please visit yourhome.honeywell.com or call 1-800-468-1502. 33-00195EFS_A.HALF-SHEET.indd 9 4/20/2016 4:40:43 PM...
  • Page 10 Choose a Location Choose a location that is not near a heat source or on somthing that moves (like a door). Install Adapter 1. Separate the adapter from the wall plate. 2. Open the battery cover in the wireless adapter and install the CR2032 battery.
  • Page 11 Pairing the Adapter and the Doorbell 1. Press and hold the Setting button on the doorbell for three seconds. 2. Press the button on the back of the adapter. 3. Within 12 seconds of pressing the button on the adapter, press the Music button to select the ring for the doorbell.
  • Page 12 Si el producto está defectuoso (i) devuélvalo, con una factura de venta o cualquier otro comprobante de compra con fecha, al lugar donde lo compró; o (ii) llame al Servicio de atención al cliente de Honeywell al 1 (800) 468 1502. En el Servicio de atención al cliente determinarán si el producto debe ser devuelto a la siguiente dirección: Honeywell Return Goods, Dock 4 MN10-3860, 1885...