Specifications; Troubleshooting - Honeywell RDWL917AX2000 Installation And Operation Manual

Specifications

Operating Temperature
Honeywell ActivLink™
Range (open field)
Sound Level (typical)
RF Power
Battery Type
Battery Life (5 activations/day)
Rain proof

Troubleshooting

If
The doorbell does not work
Two 'beep' sounds are heard
after the normal tune
The halo light flashes yellow
at the bottom edge
Range is reduced
For help please visit resideo.com or call 1-800-633-3991.
CAUTION: Before operating, make sure that the product components have
not been damaged, have not been exposed to water or high temperatures.
Doorbell
23°F to 104°F (-5ºC to 40ºC)
916.8 MHz
450 ft. (137 m)
84dBA
-
Battery 4 x LR14 (C) 1.5V each
Up to 5 years
N/A
1. Press the Mute button until all of the Mute lights are off.
2. Make sure the correct batteries (4 C alkaline cells, 1 CR2032) are installed
with the correct polarity.
3. The doorbell might be out of range; try the doorbell in a different location.
4. Reconnect the doorbell. See "Connect a Push Button".
Replace doorbell push battery with a new CR2032.
Replace doorbell batteries with 4 new C alkaline batteries.
1. Metal structures including uPVC door frames can reduce the range. Don't
mount the the doorbell or doorbell push on or near metal structures.
2. Move the doorbell closer to the doorbell push.
3. Weak batteries will reduce range. In cold conditions (below 41ºF [5ºC]),
batteries may need to be replaced more often.
8
Push Button
-4°F to 122°F (-20ºC to 50ºC)
916.8 MHz
450 ft. (137 m)
-
<1.2W
CR2032
Up to 2 years
Pass UL1598 rain test.
Then