Name And Function Of Each Part; Scale - Magnescale SJ300 SJ300 Manual

2. Name and Function of Each Part

2-1. Scale

No. Name
1
Head holder
2
Slider
3
Holder bracket
4
Shaft scale
5
Cable connector
6
Scale brackets
A, B, and C
7
Status lamp
SJ300 Series
Head
Function
Includes built-in detector sensor using MR element.
This receives signals from the head and includes a circuit
for generating A/B quadrature signals.
Secures the head holder and slider. This prevents
unnecessary force from being applied to the head holder
during installation. It serves as a rough guide for head
and scale installation, and so do not remove it until scale
mounting is completed.
The structure has an internal magnetic band for magnetic
recording. The outer surface has a stainless steel pipe
structure that also provides protection.
Connects the cable.
Do not apply excessive pressure to the connector pins.
This can cause them to break.
These brackets are used to mount the shaft scale.
There are three types: A, B, and C.
This is a lamp for checking the scale mounting.
3
(E)