Activation; Setting A Desired Speed; Deactivation; Resume Speed - Fiat 500X 2017 Owner's Manual

236 STARTING AND OPERATING

Activation

Push the on/off button to activate the Speed Control.
The cruise indicator light in the instrument cluster
display will illuminate. To turn the system off, push the
on/off button a second time. The cruise indicator light
will turn off. The system should be turned off when not
in use.
WARNING!
Leaving the Speed Control system on when not in
use is dangerous. You could accidentally set the
system or cause it to go faster than you want. You
could lose control and have an accident. Always
leave the system off when you are not using it.

Setting A Desired Speed

Turn the Speed Control on.
NOTE: The vehicle should be traveling at a steady
speed and on level ground before pushing the SET (+)
or SET (-) button.
When the vehicle has reached the desired speed, push
the SET (+) or SET (-) button and release. Release the
accelerator and the vehicle will operate at the selected
speed.

Deactivation

A soft tap on the brake pedal, pushing the CANC
button, ESC intervention, brake control mitigation, elec-
tronic park brake intervention, or normal brake pres-
sure while slowing the vehicle will deactivate the Speed
Control without erasing the set speed from memory.
Pushing the on/off button or turning the ignition
switch to STOP erases the set speed from memory.

Resume Speed

To resume a previously set speed, push the RES button
and release. Resume can be used at any speed above
20 mph (32 km/h).

Varying The Speed

To Increase Speed
When the Speed Control is set, you can increase speed
by pushing the SET (+) button.