Assembling The Cutting Blade; Operation - GardenMaster GM43PBC Safety And Operating Manual

ATTENTION left thread - to tighten turn counter
clockwise, to loosen turn clockwise (See Fig. D2).

ASSEMBLING THE CUTTING BLADE

ATTENTION: Spindle is provided with a left
hand thread – to loosen turn clockwise.
WARNING! To prevent injury wear thick safety
gloves and use correct assembly tools and
equipment.
1. Locate the cutting blade on the upper plate. Make
sure that the blade is located correctly onto the rim.
Locate the lower plate (i) onto the cutting blade shaft
with the hollowed face facing the blade (See Fig E1).
2. Fit the plate cover (j), attach the locking nut (k) and
make sure that it is firmly se-cured using the supplied
socket spanner (See Fig E2).

OPERATION

FUELING
Safety Tips for Fueling
1) Always handle fuel with care. It is highly flammable.
2) Always refuel outdoors where there are no sparks and
flames.
3) Do not inhale fuel vapors.
4) Do not let petrol or oil come into contact with your skin.
5) Keep petrol and oil away from the eyes. If petrol or oil
comes in contact with the eyes, wash them immediately
with clean water. If irritation is still present, seek
immediate medical help.
6) Clean up spilled fuel immediately. Always store fuel in
an approved container.
Mixing fuel and oil (not supplied)
WARNING! Read ''Safety Tips for Fueling''
before you begin.
1) This engine is designed to operate on unleaded petrol.
This product requires pre-mixing petrol and 2-stroke oil.
(Not supplied).
2) Before operation, petrol must be mixed with good
quality synthetic 2-stroke air-cooled engine oil (Not
supplied) designed to be mixed at a ratio of 30:1 (30 parts
petrol to 1 part oil).
WARNING! Customers should purchase the
2-stroke oil otherwise.
3) DO NOT USE automotive or marine oil. These
oils will cause engine damage.
4) Mix the fuel thoroughly each time and when refueling.
5) Mix in small quantities. Do not mix a quantity that is
larger than can be used in a 30-day period.
6) Petrol is highly flammable and extreme precautions
must be taken when handling or working with petrol.
Fig.D1
Fig.D2
Fig.E1 Fig.i
Fig.E2
Fig.F1
Fig.F2
i
j
k
m
n
11 11