Specifications; The Manual - Siemens SITRANS LR460 Quick Start Manual

The Manual

SITRANS LR460 supports HART communication protocol, or PROFIBUS PA, and SIMATIC PDM
software, and this manual is in 3 parts:
SITRANS LR460 (HART/PROFIBUS PA)
•
PROFIBUS PA models, including:
• power, approvals, installation, connecting, programming, activating, quick start via
handheld programmer, communications via HART or PROFIBUS PA, quick start via
SIMATIC PDM
Hazardous area installations
•
SITRANS LR460 PROFIBUS PA wiring
•
SITRANS LR460 (HART/PROFIBUS PA)
The SITRANS LR460 is a 4-wire 24 GHz FMCW radar level transmitter with extremely high
signal-to-noise ratio and advanced signal processing for continuous monitoring of solids up to
100 m (328 ft). It is ideal for measurement in extreme dust. The Easy Aimer design makes it
easy to install the device and orient the signal towards the material angle of repose. The high
frequency signal creates a narrow emission cone, which makes the LR460 quite insensitive to
vessel interferences.

Specifications

For a complete listing, see the SITRANS LR460 Instruction Manual, available from the product
page of our website at: https://pia.khe.siemens.com/index.asp?Nr=14655. For Approvals
information, please refer to the product nameplate.
Power
• 100 to 230 V AC,
• Fuse (AC)
• Fuse (DC)
A5E32007360
on page 3: information for both HART/
on page 15
on page 8

15%, 50/60 Hz, 6 W or 24 V DC, +25/-20%, 6 W
SI1 Fast acting ceramic, 4 x 20 mm, 1 A, 250 V AC
SI2 Slow-Blow, 4 x 20 mm, 0.63 A, 250 V AC
SI1 Fast acting ceramic, 4 x 20 mm, 2 A, 250 V AC
SI2 Slow-Blow, 4 x 20 mm, 0.63 A, 250 V AC
SITRANS LR460 – QUICK START MANUAL Page EN-3