Safety Guidelines; Canadian Installations Only: Industry Canada (Ic) Rules - Siemens SITRANS LR460 Quick Start Manual

Radar transmitter
Hide thumbs Also See for SITRANS LR460:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Safety Guidelines

Warning notices must be observed to ensure personal safety as well as that of others, and to
protect the product and the connected equipment. These warning notices are accompanied by
a clarification of the level of caution to be observed.
WARNING: relates to a caution symbol on the product, and means that
failure to observe the necessary precautions can result in death, serious
injury, and/or considerable material damage.
1
WARNING
can result in death, serious injury, and/or considerable material damage.
means important information about the product or that part of the operating manual.
Note:
1.
This symbol is used when there is no corresponding caution symbol on the product.
FCC and IC Conformity
US Installations only: Federal Communications Commission (FCC)
rules
WARNING: Changes or modifications not expressly approved by Siemens
Milltronics could void the user's authority to operate the equipment.
Notes:
• This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
• This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference to radio communications, in which case the user will
be required to correct the interference at his own expense.

Canadian Installations only: Industry Canada (IC) rules

Notes:
• This device shall be installed and operated in a completely enclosed container to prevent
RF emission, which otherwise can interfere with aeronautical navigation. Installation
shall be done by trained installers, in strict compliance with the manufacturer's
instructions.
• The use of this device is on a 'no-protection non-interference' basis.
- The user shall accept operations of high powered radar in the same frequency band,
which may interfere with or damage this device.
- The user is responsible for removing, at the user's expense, any device found to
interfere with primary licensing operations.
Page EN-2
: means that failure to observe the necessary precautions
SITRANS LR460 – QUICK START MANUAL
A5E32007360

Advertisement

Table of Contents
loading

Table of Contents