Listen To An Audio Source On Channel 2 While A Video Is Playing On Channel 1 - Dodge journey 2017 Owner's Manual

Ensure the remote control channel selector switch and
Headphone switch (IR channel) are the same number.
Using The Remote Control
1. Push the MODE button on the Remote Control.
2. While looking at the video screen, highlight VES AUX 2,
by either pushing Up/Down/Left/Right buttons or by
repeatedly pushing the MODE button, then push EN-
TER on the Remote Control.
Using The Touchscreen Radio Controls
1. Press the "MORE" button on the touchscreen.
2. Press the "Rear Entertainment" button on the touch-
screen to display the Rear Entertainment Controls.
3. If the Rear Entertainment is turned off, press the
"Power" button on the touchscreen.
4. Press the "1" or "2" button on the touchscreen for the
channel desired and press the "Source" button on the
touchscreen to select the desired mode.
Listen To An Audio Source On Channel 2 While A
Video Is Playing On Channel 1
Ensure the Remote Control and Headphone switch is on
Channel 2.
UNDERSTANDING YOUR INSTRUMENT PANEL 291
Using The Remote Control
1. Push the MODE button on the Remote Control and the
Mode Select Screen will display, unless a video is
playing then only a small banner will appear on the
bottom of the screen.
2. While looking at the video screen, either press Up/
Down/Left/Right on the Remote Control to highlight
the desired audio source or repeatedly push the MODE
button on the remote until the desired audio source
appears on the screen.
Using The Touchscreen Radio Controls
1. Press the "MORE" button on the touchscreen.
2. Press the "Rear Entertainment" button on the touch-
screen to display the Rear Entertainment Controls.
3. If the Rear Entertainment is turned off, press the
"Power" button on the touchscreen.
4. Press the "1" or "2" button on the touchscreen for the
channel desired and press the "Source" button on the
touchscreen to select the desired mode.
4