Dodge journey 2017 Owner's Manual page 486

484 MAINTAINING YOUR VEHICLE
6. Install the bulb and connector assembly into the tail
lamp housing and rotate the connector ¼ turn clockwise
to lock it in place.
7. Reinstall the tail lamp housing and fasteners.
Changing The Backup Lamp
1. Open the liftgate.
2. Remove the two fasteners retaining the tail lamp hous-
ing to the liftgate from the inboard face of the liftgate.
Tail Lamp Housing Retainers
3. Carefully insert a trim stick (plastic flat-blade tool)
between the tail lamp housing and the liftgate. Use the
trim stick and hand pressure together to disengage the
tail lamp housing from the liftgate.
Tail Gate Lamp
4. Rotate the applicable bulb's electrical connector ¼ turn
counterclockwise and remove it from the housing.
5. Remove the bulb from the connector socket and install
the replacement bulb.
6. Install the bulb and connector assembly into the housing
and rotate the connector ¼ turn clockwise to lock it in
place.
7. Reinstall the tail lamp housing and fasteners.