Listen To An Audio Source On Channel 2 While A Video Is Playing On Channel 1; Important Notes For Single Video Screen System - Dodge Journey 2012 Owner's Manual

2. Touch the "Rear Entertainment" soft-key to display
the Rear Entertainment Controls.
3. If the Rear Entertainment is turned off, touch the
"Power" soft-key.
4. Touch the "1" or "2" Source soft-key for the channel
desired and touch the "AUX" soft-key.
Listen To An Audio Source On Channel 2 While A
Video Is Playing On Channel 1
Ensure the Remote Control and Headphone switch is on
Channel 2.
Using The Remote Control
1. Press the MODE button on the Remote Control and
the Mode Select Screen will display, unless a video is
playing then only a small banner will appear on the
bottom of the screen.
UNDERSTANDING YOUR INSTRUMENT PANEL 325
2. While looking at the video screen, either press Up/
Down/Left/Right on the Remote Control to highlight the
desired audio source or repeatedly press the MODE
button on the remote until the desired audio source
appears on the screen.
Using The Touch-Screen Radio Controls
1. Touch the "MORE" soft-key.
2. Touch the "Rear Entertainment" soft-key to display
the Rear Entertainment Controls.
3. If the Rear Entertainment is turned off, touch the
"Power" soft-key.
4. Touch the "2" Source soft-key and select the desired
source.

Important Notes For Single Video Screen System

• VES™ is able to transmit two channels of stereo audio
simultaneously.
4