Using A Heating Bath; Operation; Switching The Instrument On - Heidolph MR Hei-Standard Instruction Manual

E
6

Using a heating bath

7

Switching the instrument on

Caution:
Heating and stirring will begin immediately after the instrument is
switched on in accordance with the settings of control knobs (B) and (C).
Hotplate is hot! Agitator will begin turning immediately!
Danger of burns and splashing.
Before switching the unit on, turn control knobs (C) and (B) fully to the
left.
Turn on the instrument's power using
the rocker switch (A) on the right side
of the housing. The green Power
LED (G) on the front panel will light.
When using the instrument with a heating
bath (see Accessories), ensure that the
positioning rim on the heating bath is fitted
securely over the hotplate.
When using the 4l heating bath, a special
temperature sensor holder rod for 4l
heating baths (order no. 509-97000-00)
may be attached as shown (W).

OPERATION

24