Appendix; Technical Data; Notes On The Declaration Of Conformity - UNITED OFFICE ULG 350 B1 Operating Instructions Manual

Appendix

Technical data

Operational voltage
Current consumption
Power consumption
Protection class
Pouch width
Pouch thickness for hot lamination
Pouch thickness for cold lamination
Lamination times
Sheet size
DIN A4
DIN A5
Overheating protection
This appliance is fitted with an overheating protector. If the motor overheats
due to overloading, the appliance switches itself off automatically. In this case,
disconnect the power cable and wait until the appliance has cooled down to
room temperature. You can then reconnect the power cable with a mains power
socket and take the appliance back into operation. We recommend that you let
the appliance cool down for about 30 minutes after 2 hours of operation.

Notes on the Declaration of Conformity

This appliance complies, in regards to conformance with
the basic requirements and other relevent regulations, with
the EMC Directive 2014/30/EU, as well as the Directive
for Low Voltage Devices 2014/35/EU.
The complete original Declaration of Conformity can be
obtained from the importer.
GB │ IE │ NI
│
■ 12
Pouch thickness switch
position: 80 Micron
approx. 40 s
approx. 29 s
220 - 240 V ∼, 50 Hz
1.6 A
350 W
II /
max. 230 mm
max. 125 Micron
max. 200 Micron
Pouch thickness switch
position: 125 Micron
approx. 51 s
approx. 36 s
ULG 350 B1