Table of Contents
Advertisement
Booster Mode: Positioning Your Child Seat
WARNING:
•
Position forward-facing only in a seating position with a lap-shoulder
belt.
•
Use only the vehicle's lap and shoulder belt system when securing
a child in booster mode. Never secure a child with a lap belt only in
booster mode.
•
In booster mode, this child seat can be positioned to the vehicle seat
using LATCH.
•
If the LATCH anchors in your vehicle prevent proper vehicle belt
fit across your child you cannot use LATCH to position this seat in
booster mode.
*
The vehicle belt fits properly when the lap portion sits low across
the child's hips and the shoulder portion lies across the child's
shoulder and does not contact the child's neck when properly
routed through the upper belt guide
LATCH
Checklist for proper installation:
Does your vehicle:
9
Have a top tether anchor in the chosen seating position?
Have LATCH anchors in the chosen seating position?
9
IMPORTANT: Use LATCH to position this child seat to your vehicle seat. You
must secure your child using the vehicle Lap-Shoulder belt system.
36
Booster Mode: Positioning Your Child Seat
1
Detatch the Versa-Tether
hook
®
from the storage clip.
3
Place the child seat on the vehicle
seat.
5
Push the child seat into the vehicle
seat and pull the loop end of each
LATCH strap through the belt slot
to tighten.
2
Ensure the recline block is in the
booster position.
4
Connect the LATCH connectors to
the LATCH anchors.
6
Attach the Versa-Tether to the
vehicle's designated tether anchor
for the chosen seating position.
37
Hide quick links:
Advertisement
Table of Contents
