Foreword For Your Safety Thank you for purchasing this product. Always keep this product dry. Do not use in rain or in damp conditions. This TT350C camera flash applies to Canon series cameras and is This product contains high-voltage electronic parts. Touching compatible with TTL autoflash.
Contents Foreword For Your Safety Name of Parts Body Control Panel LCD Panel What's in the Box of TT350C? Separately Sold Accessories Attaching to a Camera Power Management Flash Mode: TTL Autoflash FEC (Flash Exposure Compensation) High-Speed Sync Second-Curtain Sync Flash Mode –...
What’s in the Box of TT350C? ● Power Management 1. Flash unit 2. Mini stand 3. Protection case 4. Diffuser 5. Instruction manual Power Switch to power the flash unit on (Long press the Separately Sold Accessories ● button for one second) or off. Turn off if it will not be used for an extended period of time.
FEC: Flash Exposure Compensation M: Manual Flash With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops. It is useful in situations where minor adjusting of the TTL system is The flash output is adjustable from 1/1 full power to 1/128th power needed based on the environment.
● This flash can work in TTL /M /Multi / OFF flash modes when set to set the number. as a master unit. When using Godox 2.4G wireless X system, TT350C is perfectly compatible with other products of our company. Calculating the Shutter Speed...
Press the <SET> button to Slave Unit Setting ZOOM SYNC SLAVE confirm. Long Press the <SYNC> ZOOM SYNC SLAVE button for 2 seconds so that < > is blinking. Turn the Select Dial until the < > is displayed on the LCD panel, which means the slave unit.
6. M: Wireless Flash Shooting with Manual Flash Slave/Master Unit's Positioning and Operation Range ● Autoflash Shooting with One Slave Unit This describes wireless (multiple shooting) using manual flash. You can shoot with a different flash output setting for each slave unit (firing group).
Other Applications If the wall or ceiling is too far away, the bounced flash might ● be too weak and result in underexposure. The wall or ceiling should be a plain, white color for high ● Auto Focus Assist Beam reflectance.
Using the Wide Panel Protection Function Pull out the wide panel and place it over the flash head as shown. The 1. Over-Temperature Protection flash coverage will then be extended to 14 mm. To avoid overheating and deteriorating the flash head, do not fire ●...
• Auto Focus Assist Beam Firmware Upgrade Effective range (approx.) Center: 0.6~4m Periphery: 0.6~2.5m This flash supports firmware upgrade through the USB port. Update information will be released on our official website. • Power Supply USB connection line is not included in this product. The USB AA batteries Ni-MH batteries (recommended) or 2*LR6 alkaline batteries port is a standard Micro USB socket.
Troubleshooting Compatible Camera Models This flash unit can be used on the following Canon camera If there is a problem, refer to this Troubleshooting Guide. models: The Camera Flash cannot be charged. 5D Mark III 760D 600D ● The battery is installed in the wrong direction. 100D 1100D Digital X...
Need help?
Do you have a question about the thinklite TTL TT350 and is the answer not in the manual?
Questions and answers