Page 1
For PENTAX INSTRUCTION MANUAL 深圳市神牛摄影器材有限公司 说 明 手 册 GODOX Photo Equipment Co., Ltd. 中英文双语 / Chinese English Bilingual 地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋 Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong 在使用本产品之前: Town, Baoan District, Shenzhen 518103, China 请先仔细阅读本手册,以确保您能安全使用。请保存好本手册以备将 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423...
Page 2
Foreword Warning Thank you for purchasing this product. Always keep this product dry. Do not use in rain or in damp conditions. This TT350P camera flash applies to PENTAX series cameras and Do not disassemble. Should repairs become necessary, this is compatible with TTL autoflash.
Contents Foreword Warning Name of Parts Body Control Panel LCD Panel What's in the Box of TT350P? Separately Sold Accessories Attaching to a Camera Power Management Flash Mode: TTL Autoflash FEC (Flash Exposure Compensation) High-Speed Sync Second-Curtain Sync Flash Mode – M: Manual Flash Flash Mode –...
What’s in the Box of TT350P? ● Power Management 1. Flash unit 2. Mini stand 3. Protection case 4. Diffuser 5. Instruction manual Power Switch to power the flash unit on (Long press the Separately Sold Accessories ● button for one second) or off. Turn off if it will not be used for an extended period of time.
FEC: Flash Exposure Compensation M: Manual Flash With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops. It is useful in situations where minor adjusting of the TTL system is The flash output is adjustable from 1/1 full power to 1/128th power needed based on the environment.
● This flash can work in TTL /M /Multi / OFF flash modes when set to set the number. as a master unit. When using Godox 2.4G wireless X system, TT350P is perfectly compatible with other products of our company. Calculating the Shutter Speed...
5. Wireless ID Settings Slave Unit Setting Change the wireless channels and wireless ID to avoid interference Long Press the <SYNC> for it can only be triggered after the wireless IDs and channels of the ZOOM SYNC SLAVE button for 2 seconds so that master unit and the slave unit are set to the same.
<MODE> Button. Using a flash (master/slave) with a radio transmission wireless The Reason & Solution of Not Triggering in Godox 2.4G Wireless shooting function make it easy to shoot with advanced wireless multiple flash lighting, in the same way as TTL autoflash shooting.
3. Whether the distance between the flash trigger and the flash If the wall or ceiling is too far away, the bounced flash might ● is too close or not →Please turn on the “close distance wireless mode” on the flash trigger be too weak and result in underexposure.
Using the Wide Panel Protection Function Pull out the wide panel and place it over the flash head as shown. The 1. Over-Temperature Protection flash coverage will then be extended to 14 mm. To avoid overheating and deteriorating the flash head, do not fire ●...
USB port is a standard Micro USB socket. Common USB Channels 16 (1~16) connection line is applicable. As the firmware upgrade needs the support of Godox G3 • Auto Focus Assist Beam • software, please download and install the "Godox G3 Effective range (approx.)
Troubleshooting Compatible Camera Models This flash unit can be used on the following PENTAX camera If there is a problem, refer to this Troubleshooting Guide. models: The Camera Flash cannot be charged. 645Z K-3II K-50 K-S2 ● The battery is installed in the wrong direction. →Install the battery in the correct direction.
Need help?
Do you have a question about the Thinklite TT350P and is the answer not in the manual?
Questions and answers