Foreword For Your Safety Thank you for purchasing this product. Always keep this product dry. Do not use in rain or in damp conditions. This V860IIN camera flash applies to Nikon DSLR series cameras This product contains high-voltage electronic parts. Touching and is compatible with i-TTL autoflash.
Contents Foreword For Your Safety Name of Parts Body Control Panel Dot-matrix LCD Panel What's in the Box of V860IIN Kit? What's in the Box of V860IIN (only flash unit)? Separately Sold Accessories Battery Attaching to a Camera Power Management Flash Mode —...
● Separately Sold Accessories (4) Radio Transmission Shooting/Optic Transmission Shooting The product can be used in combination with the following accessories ● Master Unit sold separately, so as to achieve best photography effects: Flash mode X1N TTL wireless flash trigger, FT-16S power & trigger control, Mini : Group flash (radio transmission) softbox, White &...
To unload the battery, tap the C.Fn Disabling Auto Power Off function is recommended white knob and the battery when the flash is used off camera. (C.Fn-APO, Page 48) pack will pop out. Then close C.Fn Slave Auto Power Off Timer is set to 60 minutes by the compartment.
High-Speed Sync Flash Mode — M: Manual Flash High Speed Sync (FP flash) enables the flash to synchronize with all camera shutter speeds. This is convenient when you want to use The flash output is adjustable from 1/1 full power to 1/128th power aperture priority for fill-flash portraits.
Maximum Stroboscopic Flashes: Flash Mode — RPT: Stroboscopic Flash Flash output With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture a multiple images of a moving subject in a single photograph. You can set the firing frequency (number of flashes per sec. 1/16 expressed as Hz), the number of flashes, and the flash output.
4. i-TTL:Fully Automatic Wireless Flash Shooting Even with multiple slave units, the master unit can control ● Using Automatic Wireless Flash with a Single Slave Unit all of them via wireless. In this user manual, “master unit” refers to the camera flash ●...
Using Fully Automatic Wireless Flash Wireless Flash Shooting: Radio (2.4G) Transmission The FEC and other settings that set on the master unit will also be Using a flash (master/slave) with a radio transmission wireless appeared on the slave unit automatically. The slave unit does not shooting function make it easy to shoot with advanced wireless need any operation.
● Auto Shooting with Three Slave Groups Modeling Flash If the camera has a depth-of-field preview button, pressing it will fire the flash continuously for 1 second. This is called modeling flash. It enables you to see the shadow effects on the subject and the lighting balance.
Low Battery Warning ● If the wall or ceiling is too far away, the bounced flash might If the battery power is low, < > be too weak and result in underexposure. will appear and blink on the LCD The wall or ceiling should be a plain, white color for high ●...
Protection Function Technical Data 1. Over-Temperature Protection Model V860IIN ● To avoid overheating and deteriorating the flash head, do not fire • Type more than 30 continuous flashes in fast succession at 1/1 full Compatible Cameras Nikon DSLR cameras (i-TTL autoflash) power.
Troubleshooting Firmware Upgrade If there is a problem, refer to this Troubleshooting Guide. This flash supports firmware upgrade through the USB port. Update information will be released on our official website. The Camera Flash does not fire. USB connection line is not included in this product. The USB ●...