JVC RX-8040B Instructions Manual page 62

To change the transmittable signals for
operating another manufacturer's CATV
converter or DBS tuner
1. Set the TV operation mode
selector to CATV/DBS.
2. Press and hold
TV/CATV/DBS POWER.
3. Press TV/DBS.
4. Enter a manufacturer's code
using buttons 1–9, and 0.
See page 62 to find the code.
5. Release
TV/CATV/DBS POWER.
6. Try to operate your CATV
converter or DBS tuner by
pressing
TV/CATV/DBS POWER.
When your CATV converter or DBS
tuner turns on or off, you have entered
the correct code.
If more than one code is listed for
your brand of CATV converter or
DBS tuner, try each one until the
correct one is entered.
Note:
You cannot preset the signals for both the CATV converter and
DBS tuner at the same time.
After setting the TV operation mode selector to CATV/DBS,
you can turn on and off the CATV converter or DBS tuner:
TV/CATV/DBS POWER: Turn on or off the CATV converter
After pressing TV/DBS (with the TV operation mode selector
set to CATV/DBS), you can perform the following operations on
the CATV converter or DBS tuner:
CHANNEL +/– : Change the channels.
1 – 9, 0, 100+ (+10) : Select the channels.
10 (RETURN)
: Function as ENTER if your
Notes:
• Refer to the manual supplied for the CATV converter or DBS
tuner.
• Some buttons listed above may not be used for some CATV
converters or DBS tuners.
• If you cannot change the channels of some CATV converters or
DBS tuners by pressing number buttons, press the
CHANNEL +/– buttons .
60
TV/CATV/DBS
POWER
TV/DBS
1 2
4 5
7 8
/P
10 0
RETURN
CHANNEL
or DBS tuner.
equipment requires pressing ENTER
after selecting a channel number.
To change the transmittable signals for
operating another manufacturer's VCR
1. Press and hold DVD POWER.
2. Press VCR 1.
3. Enter a manufacturer's code
using buttons 1–9, and 0.
See page 62 to find the code.
4. Release DVD POWER.
3
5. Try to operate your VCR 1 by
6
pressing one of the below
9
+ 10
buttons.
When your VCR 1 have operated
correctly, you have entered the correct
CATV/
code.
DBS
• DO NOT forget to turn on the VCR 1
before pressing one of the below
buttons.
If more than one code is listed for your
brand of VCR, try each one until the
correct one is entered.
After pressing VCR 1, you can perform
the following operations on the VCR 1:
PLAY : Start playing.
REW : Rewind the tape.
FF : Fast-forward the tape.
STOP : Stop playing and recording or rewind or
PAUSE : Pause playing or recording. To resume, press
¶ REC
: Press this button together with PLAY to start
CHANNEL +/– : Change the TV channels on the VCR 1.
1 – 9, 0, 100+ (+10)
: Select the TV channels on the VCR 1.
10 (RETURN) : Function as ENTER if your VCR 1 requires
Notes:
• Refer to the manual supplied for the VCR.
• Some buttons listed above may not be used for some VCRs.
• If you cannot change the channels of some VCRs by pressing
number buttons, press the CHANNEL +/– buttons .
VCR 1
/ REW
REC
CHANNEL
fast-forward the tape.
PLAY.
recording (only for Zone 1 operations).
Press this button together with PAUSE to
enter recording pause (only for Zone 1
operations).
pressing ENTER after selecting a channel
number.
DVD
POWER
1 2 3
4 5 6
7 8 9
/P
10 0 + 10
RETURN
PLAY
FF/
STOP PAUSE