Siemens Simatic ET 200SP Manual page 23

Technical specifications
Operational limit in entire temperature range
Voltage in relation to output range, (+/-)
Current in relation to output range, (+/-)
Basic error limit (operational limit at 25 °C)
Voltage in relation to output range, (+/-)
Current in relation to output range, (+/-)
Isochronous mode
Isochronous mode (application synchronized up to terminal)
Execution and activation time (TCO), min.
Bus cycle time (TDP), min.
Jitter, max.
Interrupts/diagnostics/status information
Substitute values can be applied
Interrupts
Diagnostic error interrupt
Diagnostics alarms
Diagnostics
Monitoring of supply voltage
Wire break
Short-circuit
Overflow/underflow
Diagnostics indicator LED
Monitoring of supply voltage
Channel status display
For channel diagnostics
For module diagnostics
Electrical isolation
Electrical isolation channels
Between the channels
Between the channels and the backplane bus
Between the channels and the supply voltage of the electronics
Permitted potential difference
Between different circuits
Insulation
Insulation tested with
Dimensions
Width
Weights
Weight, approx.
22
± 0.2%
± 0.2%
± 0.1%
± 0.1%
Yes
500 µs
750 µs
5 µs
Yes
Yes
Yes
Yes
Yes; channel-based, only for
output type current
Yes; channel-based, only for
output type voltage
Yes
Yes; green PWR LED
Yes; green LED
Yes; red LED
Yes; green/red DIAG LED
No
Yes
Yes
75 VDC / 60 VAC
(basic insulation)
707 VDC (type test)
15 mm
31 g
Analog output module AQ 2xU/I HF (6ES7135-6HB00-0CA1)
Manual, 02/2014, A5E33062529-AA
6ES7135-6HB00-0CA1