Explanation Of Parameters - Siemens Simatic ET 200SP Manual

Parameters/address space

4.3 Explanation of parameters

4.3 Explanation of parameters
Diagnostics: Missing supply voltage L+
Enabling of the diagnostics for missing or insufficient supply voltage L+.
Diagnostics: Short-circuit
Enabling of the diagnostics when a short-circuit of the actuator supply occurs.
Diagnostics: Overflow
Enabling of the diagnostics when the output value exceeds the overrange.
Diagnostics: Underflow
Enabling of the diagnostics when the output value falls below the underrange or reaches the
minimum output value or underflow.
Diagnostics: Wire break
Enabling of the diagnostics if the line to the actuator is broken.
Substitute value
The substitute value is the value that the module outputs in case of a CPU STOP.
Potential group
Specifies that a BaseUnit with incoming voltage supply is located on this slot (see system
manual ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293)).
14
Analog output module AQ 2xU/I HF (6ES7135-6HB00-0CA1)
Manual, 02/2014, A5E33062529-AA