Siemens Simatic ET 200SP Manual page 22

Analog outputs
Number of analog outputs
Voltage output, short-circuit protection
Voltage output, short circuit current, max.
Cycle time (all channels), min.
Output ranges, voltage
0 to 10 V
1 to 5 V
-5 to +5 V
-10 to +10 V
Output ranges, current
0 to 20 mA
-20 to +20 mA
4 to 20 mA
Connecting the actuators
For voltage output 2-wire connection
For voltage output 4-wire connection
For current output 2-wire connection
Load resistance (in nominal range of the output)
For voltage outputs, min.
For voltage outputs, capacitive load, max.
For current outputs, max.
For current outputs, inductive load, max.
Destruction limit for externally applied voltages and currents
Voltages at the outputs
Cable length
Cable length shielded, max.
Analog value generation
Settling time
For resistive load
For capacitive load
For inductive load
Errors/accuracies
Output ripple (in relation to output range,
bandwidth 0 to 50 kHz), (+/-)
Linearity error (in relation to output range), (+/-)
Temperature error (in relation to output range)
Crosstalk between outputs, max.
Repeat accuracy in settled state at 25 °C
(in relation to output range), (+/-)
Analog output module AQ 2xU/I HF (6ES7135-6HB00-0CA1)
Manual, 02/2014, A5E33062529-AA
Technical specifications
6ES7135-6HB00-0CA1
2
Yes
45 mA
750 µs
Yes; 15 bits
Yes; 13 bits
Yes; 15 bits incl. sign
Yes; 16 bits incl. sign
Yes; 15 bits
Yes; 16 bits incl. sign
Yes; 14 bits
Yes
Yes
Yes
2 kΩ
1 µF
500 Ω
1 mH
30 V
200 m; 1000 m for current output
0.05 ms
0.05 ms; max. 47 nF and 20 m
cable length
0.05 ms
± 0.02%
± 0.03%
± 0.003%
-50 dB
± 0.03%
21