External Component Identification; Right - HP ELITEBOOK 840 G4 Maintenance And Service Manual

2

External component identification

Right

Component
(1)
(2)
(3)
(4)
6 Chapter 2 External component identification
USB Type-C basic
Dual-Mode DisplayPort
Memory card reader
Audio-out (headphone)/Audio-in (microphone)
combo jack
Description
When the computer is on, connects and charges a USB device
that has a Type-C connector, such as a cell phone, camera,
activity tracker, or smartwatch, and provides data transfer.
Connects an optional digital display device, such as a high-
performance monitor or projector.
Reads optional memory cards that enable you to store, manage,
share, or access information.
To insert a card:
1. Hold the card label-side up, with connectors facing the
computer.
2. Insert the card into the memory card reader, and then
press in on the card until it is firmly seated.
To remove a card:
Press in on the card, and then remove it from the memory
▲
card reader.
Connects optional powered stereo speakers, headphones,
earbuds, a headset, or a television audio cable. Also connects an
optional headset microphone. This jack does not support
optional microphone-only devices.
WARNING! To reduce the risk of personal injury, adjust the
volume before putting on headphones, earbuds, or a headset.
For additional safety information, refer to the Regulatory,
Safety, and Environmental Notices.
To access this guide:
1. Type support in the taskbar search box, and then select
the HP Support Assistant app.
‒ or –
Click the question mark icon in the taskbar.
2. Select My PC, select the Specifications tab, and then
select User Guides.